Microscope Lamps and Accessories
Ted Pella Inc PELCO COLLOIDAL SILVER 30G
PELCO Colloidal Silver, Paint, 200 deg.C, Silver 60%, lacquer binder, Medium mechanical strength, 30g
Ted Pella Inc LACEY FORMVAR/CARBON 300M 50/P
Grid, Lacey Formvar/Carbon, 300 Mesh, Copper, Grid Hole Size: ~63microm, A Lacey Formvar film coated with a heavy layer of carbon
Electron Microscopy Sciences Miller Squares Graticle NE57, 20.4 mm, 9:1 Large to small square
The ratio of large to small squares is 9:1. Originally designed for hematology, they can be utilized for rapid counting of any evenly spread field of particle. References: American J. of Clin. Pathol. Vol.20, 1950, page 1079. "Time Saving Device For Counting Reticulocyte." G.Brescher and Schneiderman. Practicle Haemotology – J.D. Dacy. Published by J.A. Churchill. 2nd Edition 1956 page 25.
Size: 20.4 mm
Divisions: 9:1 Large to small square
Surface: Glass sandwich
Electron Microscopy Sciences INFINITY 3S-1UR Monochrome Camera CCD
The INFINITY3S-1UR is a high-speed, ultra-sensitive research grade microscopy camera with 1.4 megapixel resolution. The camera incorporates Sony's new ICX825 CCD sensor, producing much higher dynamic range and sensitivity over the popular ICX285 sensor. The INFINITY3S-1UR has the unmatched light sensitivity needed for challenging low light applications, such as fluorescence and NIR imaging. Lumenera's high-speed USB 3.0 data interface provides maximum allowable throughput where full resolution images can be sent to a host computer at an industry leading 60 fps.
Electron Microscopy Sciences EMS Platinum Aperture with 20 µm hole, 0.24 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 20 µm
O.D.: 6 mm
Thickness: 0.24 mm
Electron Microscopy Sciences Formvar Support Film 5-6 nm thick on Square 150 mesh Copper Grid
Support Film on grids has become a main product line for us since the demand for high quality coated grids has increased. To make your microscopy work easier and to save you a great deal of time we offer you a complete line. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. Standard coating is 5 to 6 nm thick.
Grid: Copper
Electron Microscopy Sciences Gilder Thin Bar Square 300 mesh Copper Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Copper
Pitch: 83 µm
Hole: 73 µm
Bar: 10 µm
:
Electron Microscopy Sciences Thin Sample Holder, 15x10 mm Stub
Ideal for examination cross section of thin samples, such as wafers, multi-layer of capacitors, plastics, metals, etc. For most AMRAY: 1/2" diameter, 1/8" dia. Pin (3.1mm) with split openings up to 1/4" (6.4mm), with 15mm (9/16") pin height
Microscope World Objective LD A-Plan 10x/0.25 Ph1 M27
Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD=8.5mm at CG=1mm polystyrene).
Electron Microscopy Sciences Cold Mount EMSFix Epoxy Resin
1 L resin; 325 ml hardening liquid. Lowest shrinkage of cold mounting resins. Curing time is long, excellent adhesion to most materials. Used for vacuum impregnation. Hardened epoxy is duroplastic and not affected by moderate heat or chemicals.
Color: Clear, Transparent
Curing time: 1.5 hr in oven at 75°C/167°F
Hardness: 85 Shore D
Use: Vacuum impregnation Porous samples Mineralogical samples
Shrinkage: 1
Electron Microscopy Sciences Calibration Specimen 700-1D, Unmounted
SPM calibration specimens are produced by holographic fabrication that assures high accuracy and precision. The standards provide easier testing of your SPM, improved accuracy of critical dimension measurements and accuracy of 0.5% (1 std. dev.). The pattern height of greater than 100nm provides excellent image contrast. There is uniform coverage of entire chip which allows for imaging anywhere on the chip. 700-1D, pattern: parallel ridges, nominal pitch: 700 nm, material: W-coated photoresist on Si.
Mount: Unmounted
Electron Microscopy Sciences EMS Dial A Grid-N-Block Storage
24 slots labeled with letters from A-X where the grids can be stored and rotated for easy access as well as 3 additional cavities for block storage.
Electron Microscopy Sciences Microscope Graticule NE1 Horizontal, 16 mm, 10 mm with 0.1 mm subdivisions
These scales are used for the measuring of lengths of specimen or distances between points on a variety of different shaped objects. By dividing the division of the chosen graticule by the magnification of the objective one obtains an approximate value that each division will represent on the stage. Horizontal micrometer scale.
Size: 16 mm
Electron Microscopy Sciences CoverWell™ Imaging Chamber 1 well 20 mm, 0.8mm depth, 180 µl Volume
CoverWell Imaging reusable press-to-seal silicone chambers form a removable enclosure for repeat staining or specimen repositioning. The chambers are designed to stabilize and support thick and free-floating specimens for confocal microscopy and imaging applications.
Diameter: 20 mm
Depth: 0.8 mm
Volume: 180 µl
O.D.: 25 mm x 25 mm